This chart is an easy reference tools for onsite identification of our reinforcing products and is useful for engineers and tradespeople when specifying the right product for their project.
DownloadAll SEISMIC® Earthquake Grade 500E and 300E products are produced in accordance with our Producer Statement.
DownloadInformation outlining how our products contribute to compliance with the New Zealand Building Code.
DownloadAll SEISMIC® Grade 500E and Grade 300E products by Pacific Steel are rolled with our unique bar markings to assist in identification on site.
DownloadAll activities performed on reinforcing steel shall comply with the relevant standards, primarily NZS 3101 and NZS 3109.
DownloadPacific Steel SEISMIC® products are able to contribute to a number of credits under the Green Star Design and As Built NZ v1.1 rating tool, prepared by the New Zealand Green Building Council (NZGBC).
DownloadOur New Zealand and Pacific Islands (NZPI) Sustainability Snapshot describes our business activities in the context of our sustainability performance and our contribution to sustainable development.
DownloadKey in the length, bar count and size of a required bar and the tool will punch out your mass per meter, mass per length, bars per tonne and total bundle weight.
CalculateThis is a unique industry tool developed for building inspectors, but also used on construction sites nationwide by builders, steel fabricators and steel fixers alike.
Request a CopyThis EPD sets out information on SEISMIC® reinforcing bar, coil, rod and wire at the outbound gate of the manufacturing site.
DownloadWith standards often being changed, revised, and having additions made, a history of what standards may have been applicable at the time of build is a resource well worth having.
DownloadOur ACRS certification is an independent, third-party product certification that our SEISMIC® Grade 300E and 500E products meet the New Zealand Reinforcing Standard AS/NZS 4671.
DownloadOur ACRS certification is an independent, third-party product certification that our SEISMIC® Grade 300E and 500E products meet the New Zealand Reinforcing Standard AS/NZS 4671.
DownloadOn October 31st 2016 Pacific Steel received an IANZ Certificate of Accreditation for our Mechanical Testing Laboratory.
Download